When to use this calculator
Estimate nominal metal removal rate for a milling pass. Assumes a continuously engaged rectangular removal section.
Explore the machining feeds, speeds & time calculators for other questions in this topic. For a related calculation, use the Spindle Speed Calculator: Convert a selected metric cutting speed and diameter into spindle speed.
PUTTING IT INTO PRACTICE
Milling Removal Rate: a worked example
The values below are an illustrative example, not a recommendation. Replace them with measurements or assumptions that match your question.
| Input | Example value |
|---|---|
| Cut width (mm) | 10 |
| Axial cut depth (mm) | 2 |
| Table feed (mm/min) | 200 |
| Result | 4 cm³/min |
- Check the input labels and enter the example values above.
- Apply the relationship: Removal rate = width × depth × feed/1000.
- The result is 4 cm³/min, rounded for display.
How to interpret your result
Assumes a continuously engaged rectangular removal section.
Choose cutting speeds and feeds from suitable tooling and material guidance. These tools translate quantities rather than selecting safe cutting conditions. Effective diameter, engagement, machine limits and setup time need separate attention.
Frequently asked questions
Does the spindle-speed calculation recommend a cutting speed?
No. You supply the cutting speed. The tool converts it and a diameter into revolutions per minute.
When is the milling removal rate calculator useful?
Estimate nominal metal removal rate for a milling pass. Assumes a continuously engaged rectangular removal section.
How do I use the milling removal rate calculator?
Enter cut width (mm), axial cut depth (mm), table feed (mm/min). The result updates automatically. Use the units shown beside each input; the example values illustrate the method.
Which formula does this calculator use?
Removal rate = width × depth × feed/1000.
What should I check before using the result?
Assumes a continuously engaged rectangular removal section.
How are results rounded?
Scalar numbers display up to six decimal places, with scientific notation for very large or small values. Text, fraction, date and schedule outputs use the format described on the tool. Intermediate calculations use JavaScript floating-point arithmetic. Keep sensible precision for your measurements.
Further reading
For background on this topic, see Sandvik Coromant: machining formulas and definitions ↗. This is a topic reference, not an external review or endorsement of this tool.
Calculators Map editorial process · Updated · Methods and limitations